Pacer Industrial Instant Adhesives
Standard Grade Cyanoacrylates
Standard Ethyl Types
For Bonding similar as well as dissimilar materials; including ceramics, metal, plastic, rubber and wood. Features include: good heat aging characteristics, moisture resistance, and weatherability. Excellent for adhering glass, but bond will deteriorate with age.
| Size | Part # | |||
| E-5 | INSTANT CURE: Able to penetrate between parts 5 cP viscosity allows up to .002" gap fill capability Meets MIL-A-46050C Type II Class 1 |
5 gram 20 gram 1lb. |
01015 01010 01013 |
Click here for MSDS |
| E-40 | FAST CURE: General Purpose 40 cP viscosity allows up to .004" gap fill capability Meets MIL-A-46050C Type II Class 2 |
5 gram 20 gram 1lb. |
01025 01020 01023 |
Click here for MSDS |
| E-100 | MEDIUM CURE: Broad use adhesive 100cP viscosity allows up to .005" gap fill capability Meets MIL-A-46050C Type II Class 2 |
5 gram 20 gram 1lb. |
01035 01030 01033 |
Click here for MSDS |
| E-1500 | SLOW CURE: Bridges gaps, allows work piece alignment 1500cP viscosity allows up to .010" gap fill capability Meets MIL-A-46050C Type II Class 3 |
20 gram 1lb. |
01050 01053 |
Click here for MSDS |
| E-2500 | VERY SLOW CURE: Allows for maximum time for positioning of parts. Use to bond fibrous and porous materials 2500 cP viscosity allows up to .020" gap fill capability Meets MIL-A-46050C Type II Class 3 |
20 gram 1lb. |
01060 01063 |
Click here for MSDS |
Advanced Grade Cyanoacrylates
RX-Range Extended
This group of instant adhesives is virtually non-surface sensitive, and will bond in situations where conventional cyanoacrylates fail. The bonding surfaces of acidic substrates, like woods, veneers, rubber, cork, cardboard and leather, are overcome by these High Performance grades of cyanoacrylates. unlike other instant adhesives available, the RX chemistry allows the user to achieve Instant/High Strength bonds on surfaces contaminated with: Silicone greases, oils & release agents, as well as plated parts, reducing surface preparation costs. RX will also bond routine plastics, nylon, Delrin, vinyls, naugahyde, woven fabrics and metals.
| Size | Part # | |||
| RX-5 | INSTANT CURE: Able to penetrate between parts 5 cP viscosity allows up to .002 degree gap fill capability Meets MIL-A-46050C Type II Class 1 |
5 gram 20 gram 1lb. |
04055 04050 04053 |
Click here for MSDS |
| RX-50 | FAST CURE: General Purpose 40 cP viscosity allows up to .004" gap fill capability Meets MIL-A-46050C Type II Class 2 |
5 gram 20 gram 1lb. |
04015 04010 04013 |
Click here for MSDS |
| RX-100 | MEDIUM CURE: Broad use adhesive 100cP viscosity allows up to .005" gap fill capability Meets MIL-A-46050C Type II Class 2 |
5 gram 20 gram 1lb. |
04025 04020 04023 |
Click here for MSDS |
| RX-500 | SLOW CURE: Bridges gaps, allows work piece alignment 1500cP viscosity allows up to .010" gap fill capability Meets MIL-A-46050C Type II Class 3 |
20 gram 1lb. |
04040 04043 |
Click here for MSDS |
| RX-700 | VERY SLOW CURE: Allows more time for positioning of parts. Can be spread or squeegee applied 2500 cP viscosity allows up to .020" gap fill capability Meets MIL-A-46050C Type II Class 3 |
20 gram 1lb. |
04060 04063 |
Click here for MSDS |
| RX-GEL | SLOWEST CURE TIME: Allows maximum time for positioning of parts. Non-sag, non-running formula allows for vertical applications Allows .020" gap fill capacity |
5 gram 20 gram 200 gram cartridge |
04075 04070 04072 |
Click here for MSDS |
Advanced Cyanoacrylates
MR Instant Adhesives are specially formulated to resist moisture and humidity while retaining tensile shear strength. MR's are also temperature resistant. Three viscosity ranges are available to meet a variety of bonding needs.
| Size | Part # | |||
| MR-10 | FAST CURE: Able to penetrate between parts 10 cP viscosity allows up to .002" gap fill capability Meets MIL-A-46050C Type II Class 2 |
20 gram 1lb. |
04440 04443 |
Click here for MSDS |
| MR-290 | SLOW CURE: Allows part positioning time 290cP viscosity allows up to .012" gap fill capability Meets MIL-A-46050C Type II Class 2 |
5 gram 20 gram 1lb. |
04455 04450 04453 |
Click here for MSDS |
| MR-3000 | VERY SLOW CURE: Allows work piece alignment 3000cP viscosity allows up to .015" gap fill capability Meets MIL-A-46050C Type II Class 3 |
20 gram 1lb. |
04460 04463 |
Click here for MSDS |
| NO-150 | No -Oder No-Frost: Instant adhesives for applications where appearances are critical without irritating vapors or fumes. Good adhesive for plastic, rubber and metal with suitable applications on cosmetic cases, medical devices and electronic assemblies. | |||
| SLOW CURE: Allows for positioning of parts. 150 cP viscosity allows up to .006" gap fill capability |
20 gram 1lb. |
04110 04123 |
Click here for MSDS | |
Advanced Grade Cyanoacrylates
PX Plastics - Extended Performance grades provide maximum strengths for bonding various plastics and elastomerics together or in combination with metals and other materials. Select PX whenever organic materials are to be bonded. Service temperature range -65 degrees F to 200 degrees F, impact strengths, 4-8 lbs/in2. The PX chemistry provides an intermediate grade between the RX and the H1 type product capabilities. Excellent performance on nylon, ABS, PVC, certain fluorocarbons, etc. Will not crack or craze ABS.
| Size | Part # | |||
| PX-5 | INSTANT CURE: Able to penetrate between parts 5 cP viscosity allows up to .002" gap fill capability Meets MIL-A-46050C Type II Class 1 |
20 gram 1lb. |
05070 05073 |
Click here for MSDS |
| PX-50 | FAST CURE: General purpose 50cP viscosity allows up to .004" gap fill capability Meets MIL-A-46050C Type II Class 1 |
5 gram 20 gram 1lb. |
05085 05080 05083 |
Click here for MSDS |
| PX-500 | SLOW CURE: Allows work piece alignment 500cP viscosity allows up to .008" gap fill capability Meets MIL-A-46050C Type II Class 3 |
20 gram 1lb. |
05090 05093 |
Click here for MSDS |
| TX-5 | TX Temperature Extended: Single component, high temperature cyanoacrylates for use at service temperatures up to 300 degrees F. Best for wire tacking and component bonding to printed circuit boards before and after wave soldering. TX chemistry is specially designed to permit rapid "wire tacking" to plain printed circuit boards; boards covered with solder masks; and provides the best performance for "tacking" when board processing includes water washing operations. These formulations work well on chromate conversion coatings and oily parts. Excellent impact strengths of 10-15 lbs/in2 can be obtained. | |||
| INSTANT CURE : Able to penetrate between parts 5 cP viscosity allows up to .002" gap fill capability Meets MIL-A-46050C Type II Class 1 |
20 gram 1lb. |
05101 05102 |
Click here for MSDS | |
| TX-100 | MEDIUM CURE: Broad use adhesive 100cP viscosity allows up to .004" gap fill capability Meets MIL-A-46050C Type II Class 2 |
20 gram 1lb. |
05511 05512 |
Click here for MSDS |
| TX-750 | SLOW CURE: Allows work piece alignment 750cP viscosity allows up to .010" gap fill capability Meets MIL-A-46050C Type II Class 3 |
20 gram 1lb. |
04504 04503 |
Click here for MSDS |
Advanced Grade Cyanoacrylates
HI-HIGH Impact
This group of structural instant adhesives is formulated to contribute toughness and impact resistance. Maximum impact values attainable. Also recommended for bonding plastic and rubber together. Works well on aluminum and other metal surfaces.
| Size | Part # | |||
| HI-50 | FAST CURE: General purpose 50cP viscosity allows up to .004" gap fill capability Meets MIL-A-46050C Type II Class 1 |
20 gram 1lb. |
05010 05013 |
Click here for MSDS |
| HI-150 | MEDIUM CURE: Broad use adhesive 150cP viscosity allows up to .005" gap fill capability Meets MIL-A-46050C Type II Class 2 |
5 gram 20 gram |
05020 |
Click here for MSDS |
| HI-500 | SLOW CURE: Allows work piece alignment 500cP viscosity allows up to .008" gap fill capability Meets MIL-A-46050C Type II Class 3 |
20 gram 1lb. |
05110 05110 |
Click here for MSDS |
| HC-150 | HC - HIGH CLARITY An isopropyl formulation that generates 75% less adhesive vapor during cure, resulting in dramatically reduced chlorosis (i.e. formation of white deposition of low molecular weight) in applications where cosmetics are important. high clarity grades have better moisture resistance then ethyl type cyanoacrylates |
|||
| MEDIUM CURE : Broad use adhesive 150cP viscosity allows up to .006" gap fill capability |
20 gram 1lb. |
03040 03043 |
Click here for MSDS | |
| HP-10 | HP - HIGH PEEL/HIGH PERFORMANCE This chemistry exhibits characteristics unique to instant adhesives; high T-peel strength, impact strength (impact resistance), thermal shock resistance, excellent performance for metal to metal structural bonds. |
|||
| FAST CURE: Able to penetrate between parts 10 cP viscosity allows up to .002" gap fill capability Meets MIL-A-46050C Type II Class 1 |
20 gram 1lb. |
04213 | Click here for MSDS | |
| HP-500 | SLOW CURE: Allows work piece alignment 500cP viscosity allows up to .012" gap fill capability Meets MIL-A-46050C Type II Class 3 |
20 gram 1lb. |
04240 04243 |
Click here for MSDS |
| HP-3000 | VERY SLOW CURE: Allows work piece alignment 3000cP viscosity allows up to .015" gap fill capability Meets MIL-A-46050C Type II Class 3 |
20 gram 1lb. |
04260 04263 |
Click here for MSDS |
| HP-5000 | SLOWEST CURE TIME: Large gap fill 5000cP viscosity allows up to .018" gap fill capability Meets MIL-A-46050C Type II Class 4 |
20 gram 1lb. |
04280 04283 |
Click here for MSDS |
