Anaerobic Adhesives
Anaerobic Adhesives
Include: Threadlocking, Thread Sealing, Retaining, Flange Sealing
| Size | Part # | ||||
| ANL-22 |  |
LOW STRENGTH: Removable for locking/sealing small screws under 1/4" diameter. May be disassembled with hand tools. Meets MIL-A-46050C Type II, Grade M |
10 ml 50 ml 250 ml 1 liter |
06110 06112 06111 06113 |
Click here for MSDS |
| ANL-42 |  |
MEDIUM STRENGTH: Removable general purpose adhesive, for locking/sealing fasteners over 1/4" in diameter. may be disassembled with hand tools. Meets MIL-A-46050C Type II, Grade N |
10 ml 50 ml 250 ml 1 liter |
06120 06122 06121 06123 |
Click here for MSDS |
| ANL-71 |  |
HIGH STRENGTH: Permanent , for locking/sealing fasteners up to 1" in diameter. Disassembly difficult Meets MIL-A-46050C Type II, Grade K |
10 ml 50 ml 250 ml 1 liter |
06140 06142 06141 06143 |
Click here for MSDS |
| ANL-77 |  |
HIGH STRENGTH: Permanent , for locking/sealing fasteners 1" in diameter and larger. Disassembly difficult Meets MIL-A-46050C Type I, Grade L |
10 ml 50 ml 250 ml 1 liter |
06150 06152 06151 06153 |
Click here for MSDS |
| ANL-90 |  |
HIGH STRENGTH: Penetrating permanent, for locking/sealing pre assembled fasteners. Also used to seal weld and casting porosity. Disassembly difficult. Meets MIL-A-46050C Type III, Grade R |
50 ml 250 ml 1 liter |
06162 06161 06163 |
Click here for MSDS |
| ANL-RC |  |
HIGH STRENGTH: General purpose, retaining compound for retaining bearings, bushings, collars, keys and splines. has .005" gap filling capability. Allows slip fit instead of press fit parts | 10 ml 50 ml 250 ml 1 liter |
06170 06172 06171 |
Click here for MSDS |
| ANL-RC/HT | |
HIGH TEMPERTURE: Retaining compound for retaining bearings, bushings, collars,gears and other cylindrical parts Fills gaps to .015" gap and resists temperatures up to 450 degrees F (232 degrees C) | 10 ml 50 ml 250 ml 1 liter |
06180 06182 06181 06183 |
Click here for MSDS |
| Pipe Sealant Plus Teflon® | Temperature Range: -65 to 300° F (-54 o 149° C) Viscosity: HIGH, Gap Fill: .015" Cure Speed: 15-30 minutes primed, 2-4 hours unprimed |
50 ml | 08000 | Click here for MSDS | |
| Hydraulic/ Pneumatic Sealant |
Temperature Range: -65 to 300° F (-54 o 149° C) Viscosity: MEDIUM Gap Fill: .015" Cure Speed: 5-15 minutes primed, 30-60 minutes unprimed |
50 ml | 08020 | Click here for MSDS | |
| Universal Flange Sealant | Temperature Range: -65 to 300° F (-54 o 149° C) Viscosity: HIGH, Gap Fill: .025" Cure Speed: 15-30 minutes primed, 2-4 hours unprimed |
50 ml | 08030 | Click here for MSDS | |
