DIY Decorative Mosaic Tray

March 11, 2016 by Super Glue Corp Leave a reply »
Pin It

IMG_5265_copy

A mosaic tray can add creative flair to any coffee table or desk for a personal touch. Best of all, you won’t have to break the bank to make one. With your favorite bowl, Bondini glue, and some old CDs, you can create a beautiful custom mosaic tray for your home with these simple steps.

Materials

-Plate or bowl
-Bondini glue
-Old writable DVDs
-Kitchen shears
-Gloss (optional)
-Grout

Directions

1. First, you will need to separate the layers of the DVDs. It is important to use DVDs for this project, as CDs only have one layer. Using the kitchen shears, cut from the edge of the DVDs to the center. Repeat on the other side, cutting the DVDs in half. Gently lift apart the two layers. Continue to work your way all the way around the DVD: you should be left with a thin silver layer to use for your project.

2. Once the layers are separated, cut the DVD halves into 6 or 7 equal pieces as if you were cutting a pizza—however, leave the ends attached to the inner ring of the DVD to prevent the shards from flying. Then, tear the pieces gently from the inner ring.

3. If your tray is going to be displayed outside, you will need to spray the DVD pieces with gloss in order for them to retain their reflectiveness. Otherwise, the reflective coating will wash off in the elements.

4. Adhere the DVD pieces to the edge of the tray with a dab of Bondini glue. Be careful not to get any glue on the reflective surface.

5. Carefully apply grout between the pieces, using a damp rag to wipe off the excess. The grout will protect you from being cut by the sharp edges, and will also add another layer of protection if you plan to leave the tray outside.

For more DIY inspiration using Bondini glue, check back with the crafting experts at Super Glue.

Advertisement

Comments are closed.