Right On Cue

February 12, 2016 by Super Glue Corp Leave a reply »
Pin It

Ball with cue and chalk

If you tried to rack up all of Super Glue’s abundant amount of uses, you’d discover that, interestingly enough, the game of pool makes the list. Chocked full of skill, finesse, and strategy, pool is played, professionally and recreationally, by many people. Those who do play on a regular basis are no strangers to the issue of worn leather pool cue tips and their need for replacement. For a money-saving, D.I.Y trick, ZAP-A-GAP CA+ adhesive from Super Glue, can be used to effectively secure a new tip to the stick. That being said, let’s take a cue from the glue and dive into the step-by-step details of how this repair can be done.

Things You’ll Need

-Razor blade/knife
-2 types of sandpaper-medium grit & fine
-The new pool cue tip
-Nail polish remover
-Paper towel
-Pool cue tip clamp (optional)
-Tip shaper tool (optional)

Cue Tip Replacement

The first step to cue tip replacement, is to remove the old one. To do this, carefully use the sharp knife or razor blade to cut off the worn/broken tip. Once that is done, you will need to prepare and clean the ferrule. The ferrule is the part (typically made of metal or horn) located at the end of the cue shaft, where the tip is attached. Use your cutting tool to gently remove old glue from the top of the ferrule. Then use a piece of medium grit sandpaper on this area to make sure it is smooth and even.

Next, take your new cue tip and place the flat end on top of a piece of fine grit sandpaper. Without using too much force or pressure, briefly glide the bottom of the tip over the paper to get it smooth.

After those steps of preparation have been completed, you can move on to attaching the new cue tip. To do this, simply take the ZAP-A-GAP CA+ and apply a small amount that covers the surface end of the cue shaft. Next, attach the new tip flat side down. Press firmly, but not excessively hard, and quickly make adjustments to center the cue tip.

The glue will most likely pour out a little on the sides, but don’t worry. Using a bit of nail polish remover on a paper towel, clean off any extra glue that remains. extra care not to get the nail polish remover on top of the new tip, as that can be detrimental to its structure.
Let the newly glued cue stick sit for at least an hour before handling. For firmer and more secure tip placement, you can put on a pool tip clamp. Lastly, use the fine grit sandpaper once again to smooth the edges of the tip. And if the tip is slightly large and/or needs reshaping, you can use tip shaper tool or the sandpaper to perfect it.

What’s Your Unique Super Glue Story?

From fixing pool cue tips to repairing musical instruments, Super Glue products are constantly being used in helpful and innovative ways. Whether you’ve used them in a handy everyday repair, or in a unique application that’s way out of the left corner pocket, so to speak, we’d love for you to share your story on our Facebook page. We look forward to hearing from you!

Advertisement

Comments are closed.